Fall/Halloween FH2

DTF Transfer Only – No Garment Included

This listing is for a DTF (Direct-to-Film) transfer only. No shirt, sweatshirt, or other garment is included.

Our premium DTF transfers are full-color, ready-to-press, and can be applied to a variety of fabrics, including:

100% Cotton

Polyester

Cotton/Poly Blends

Many other compatible materials

Please Note: A commercial heat press is recommended. These transfers can be applied using a Cricut Easy Press, handheld heat press, or household iron but may not withstand frequent washing.

Sizing
Measurements are approximate and are based on the widest part of the design. Slight variations may occur.

Application Instructions

Preheat your commercial heat press to 300–310°F.

Pre-press the garment for 5 seconds to remove moisture and wrinkles.

Position the transfer on the garment with the printed side facing down.

(Optional but recommended) Cover the transfer with a Teflon sheet or parchment paper.

Press for 8–10 seconds using firm, even pressure.

Peel the film warm. If the film does not release easily, allow it to cool completely before peeling.

Your garment is now ready to wear!

Returns & Disclaimer

By purchasing this transfer, you acknowledge that proper application is the buyer's responsibility. Because application methods are outside of our control:

No refunds or exchanges will be issued due to application errors.

All sales are final once the transfer has been applied to a garment.